Das Zentrum nutzt einen modernen Klasse 10 Reinraum mit über 900 m², der im Rahmen der Investitionen im Jahre 2008 ausgebaut wird um den Anforderungen weiterer Anlagentechnik gerecht zu werden. Nach Abschluss der Arbeiten steht eine in Europa einzigartige Infrastruktur für die Forschung, Entwicklung und Pilotfertigung organischer Bauelemente zur Verfügung.
Im COMEDD stehen folgende Linien zur Verfügung:
Prototype line: Rigid substrates
| Substrate size |
200 x 200 mm² |
| Substrate type |
Glass |
| Cycle time |
120 minutes |
| Pilot max. volume substrates / year |
- |
| Pilot max. volume area |
- |
| Prototype / technology research & development |
Ready |
Pilot line: Rigid / Flexible substrates
| Substrate size |
370 x 470 mm² (Generation 2) |
| Substrate type |
Glass or laminated foil |
| Cycle time |
3 minutes |
| Pilot max. volume substrates / year |
80,000 |
| Pilot max. volume area |
13,000 m² |
| Prototype / technology research & development |
Q1 / 2009 |
Pilot line: OLED-on-CMOS
| Substrate size |
150 or 200 mm diameter |
| Substrate type |
Silicon / CMOS wafer |
| Cycle time |
60 minutes |
| Pilot max. volume substrates / year |
6000 |
| Pilot max. volume area |
- |
| Prototype / technology research & development |
Ready |
Roll-to-Roll
| Substrate size |
300 mm width |
| Substrate type |
Metal foil |
| Cycle time |
- |
| Pilot max. volume substrates / year |
- |
| Pilot max. volume area |
- |
| Prototype / technology research & development |
Q4 / 2008 |
Social Bookmarks